| These one-component, solvent-free LoctiteŽ adhesives can be applied to a variety of different substrates. They are available in a wide viscosity range (100 to 10,000 mPa.s) and cure rapidly (on demand) to form a tough thermoset polymer. The products are specially designed for automated dispensing and curing in applications where high strength, clear bondlines and a 100% seal are required. |
Typical
applications |
Cannulae/hubs
|
Glass assemblies and optical instruments
|
Blood subassemblies in blood pressure trasnducers, arteriograph manifolds, stopcocks, fittings, adapters and arterial filters
|
Blood and seal anaesthesia, surgical and other masks. Bonding tubing to fittings in IV sets, gas inlet and arterial outlet connections on membrane oxygenators
|
Insulin glass syringes to metal needles
|
|
| | Product | Pack
Size | Viscosity
(mPa.s) | Sterilisation
methods | Max. gap | Properties | Suitable
substrates | | 3011 | 1L | 100 | ETO
Gamma
radiation | 4mm | Colour: Clear
(3081 fluorescent) | Stainless steel, thermoset and thermoplastics | | 3051 | 1L | 1,100 | ETO
Gamma
radiation | 4mm | Colour: Clear
(3942 fluorescent) | Excellent for glass and optical applications | | 3201 | 25ml
1L | 4,000 | ETO
Gamma radiation
Steam | 13+ mm | Colour: Clear
(3933 fluorescent) | Polycarbonate, acrylic and other thermoplastics where a flexible joint is required | | 3211 | 25ml
1L | 10,000 | ETO
Gamma
radiation
Steam | 13+ mm | Colour: Clear
(3936 fluorescent) | Polycarbonate, acrylic and other thermoplastics where a flexible joint is required | | 3301 | 25ml
1L | 150 | ETO
Gamma radiation
Steam | 13+ mm | Colour: Clear
(3921 fluorescent) | Metals and plastics
Best on rigid and flexible PVC, giving a flexible joint | | 3311 | 25ml
1L | 300 | ETO
Gamma radiation
Steam | 13+ mm | Colour: Clear
(3922 fluorescent) | Metals and plastics
Best on rigid and flexible PVC, giving a flexible joint | | 3321 | 25ml
1L | 5,000 | ETO
Gamma radiation
Steam | 13+ mm | Colour: Clear
(3926 fluorescent) | Metals and plastics
Best on rigid and flexible PVC, giving a flexible joint | | 3341 | 25ml
1L | 450 | ETO
Gamma radiation
Steam | 13+ mm | Colour: Clear fluorescent | Metals and plastics
Best on rigid and flexible PVC, giving a flexible joint | | 3345 | 250ml
1L | 1,500 | ETO
Gamma radiation
Steam | 4mm | Colour: Clear | Glass and metals |
|
|
|
| Depth of cure is dependent upon spectral output of lamp, radiation intensity, distance of parts from light source, transmittance of substrates and bonding gap and geometry. |
