Manufacturers: Airflow Besta Bimba Stainless De-Sta-Co DeVILBISS Dynaclean Elcometer Fuchs Lubritech Loctite® Threadlocking Pipe & Thread Sealing Gasketing Retaining Instant Bonding Structural Bonding Flexible Sealing & Bonding Lubrication: Oils & Dry Film Lubrication: Greases Lubrication: Anti-Seize Metal-filled Compounds Wearing Compounds Cleaning Surface Preparation Emergency Repair Products Equipment Loctite® Medical Adhesives London Fan Co. Norgren Numatics PCL Air Technology Robohand Titan Airless Spray Technology Wagner Weka HOME ABOUT US PRODUCTS CONTACT US LOCATION LINKS        Wearing Compounds          Features: Restore worn surfaces Wear-resistant coating Use on new parts to extend life Available in both trowelable and brushable forms                                   Repair or rebuild worn surfaces          |          Fine, coarse or badly worn surface abrasion?          | |          | Coarse          | | | |          Rebuild badly worn surfaces Large particle wear up to 120°C High temperature up to 230°C High Impact          | | | | Solution: 7222 7218 7230 7219 Colour Grey Grey Grey Grey Maximum Temperature 107°C 120°C 230°C 120°C Mix Ratio by Volume 2 to 1 2 to 1 4 to 1 2 to 1 Working Time 30 min. 30 min. 30 min. 30 min. Cure Time 6 hrs 7 hrs 7 + 2 hrs* Post Cure 6 hrs Recommended Layer Thickness min. 6 mm min. 6 mm min. 6 mm min. 6 mm Pack Sizes 1.4 kg 1 kg, 10 kg 10 kg 1 kg, 10 kg          * Require post heat cure at 150°C for maximum temperature resistance                            Repair or rebuild worn surfaces          |          Fine, coarse or badly worn surface abrasion?          | |          Fine Chemical resistant          | |          Pneumatic abrasion |          | | | |          Thick layer Thin film Ultra smooth Low friction          | | | | |          High temperature up to 230°C Fine particle wear up to 230°C Temperature resistance 230°C Temperature resistance 90°C Chemical resistant Use up to 65°C          | | | | | Solution: 7229 7226 7234 7227/7228 7221 Colour Grey Grey Grey Grey/White Grey Maximum Temperature 230°C 120°C 205°C 95°C 65°C Mix Ratio by Volume 4 to 1 4 to 1 2.6 to 1 2.75:1 / 2.8:1 2.3 to 1 Working Time 30 min. 30 min. 30 min. 30 min./15 min. 20 min. Cure Time 6 + 2 hrs* Post Cure 6 hrs 8 + 3 hrs* Post Cure 6hrs/5hrs 16hrs Recommended Layer Thickness min. 6 mm min. 6 mm min. 0.5 mm min. 0.5 mm min. 0.5 mm Pack Sizes 10 kg 1kg, 10kg 1 kg 1 kg 5 kg          * Require post heat cure at 150°C for maximum temperature resistance            If you would like to receive a copy of our Loctite® Product Catalogue, click here

Murphy Engineers Limited, John F. Kennedy Ave, Naas Road, Dublin 12, Ireland          Tel: +353 1 4500088        Fax: +353 1 4500602        Email: sales@murphy-engineers.ie        Powered by: go2web